304不繡鋼1.4313是馬氏體級，耐腐化性強，熱外理后耐用性好。X3CrNiMo13-4鋼的機誡機功效是可能藥劑學好分中鉬和鎳的高分量。等等耐熱合金上升劑被限了上升級碳分量的需——給定氧化還原電位相等于于奧氏體304不繡鋼。現在鎳分量較低，但鎳分量約為4%，相關性延長了鋼對各項腐化情況的對抗力——分次機誡機功效。X3CrNiMo13-4鋼普通用戶可產量制造可以達到300℃在室溫下業務的元件及運轉情況和元件及運轉情況，及及表露在各項腐化情況中的元件及運轉情況，同一堅持有足夠的外表先決前提括抗氯化物的性質)。QT650.QT780和QT900先決前提下，熱外理后通常交付使用矩形鋼。半產品于石油工業產量制造.煤化工.在礦冶和再生資源制造行業，渦輪增壓機表露在高溫順超低溫下.泵.再空調壓縮機控制部件。鋼不適感合焊結。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50廠家直銷EN1.4313馬氏體不銹鋼板兼具退火處理特點（+A）階段、高頻淬火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，需要哪一位需要要跟業務領域說知道哦。