1.4404–X2CrNiMo17-12-2–AISI/SAE316L1.4404或316L奧氏體不繡鋼AISI考慮到其鉻和鉬含碳量高，碳含碳量低，316型有不錯的耐生銹性。而言大的直徑，高頻淬火抗拉強度約為600MPa，因為而言小斷面，就能夠按照螺母化來增強。鋁合金有三種合格證的存量從何而來，及及的不同的貨品模式或工作狀態，使您都能否更好地足夠您的執行具體需求。企業的服務質量管理中心也能否自定義或撕成一塊塊。數字化各稱：W、 編號規則1.4404–1.4401（316）–US S31603–316L規范：ISO7153-1、ASTM F899、NF S94-090、NF EN 10088-3和-2、ASTM A479、ASTM A276、X2CrNiMo17-12-2–AFNOR Z3CND17-11-2–BS 316S31

MATERIAL SPECIFICATIONS:BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C(％): ≤0.030Si(％): ≤1.00Mn(％):≤2.00P(％)≤:0.045S(％)≤:0.030Cr(％): 16.5～18.5Ni(％): 10.0～13.0Mo(％):2.00～2.50Other(％): N≤0.11

MECHANICAL PROPERTIES( BAR/WIRE ROD ) AND INTERGRANULAR CORROSION RESISTANT TENDENCYVIASOLUTION TREATMENT

Thickness Diameter (d)/≤mm: 160Hardness HBS: 215Yield strength σ0.2≥/MPa: 200Tensile strength σb/MPa: 500～700Elongation δ(longitudinal )≥(％): 40Elongation δ(transversal )≥(％): -Impact absorbing energy Akv≥/J|longitudinal: 100Impact absorbing energy Akv≥/J|transversal: -Intergranular corrosion resistance tendency | condition of delivery: YesIntergranular corrosion resistance tendency | condition of welding: YesThickness Diameter (d)/≤mm: 160<d≤250Hardness HBS: 215Yield strength σ0.2≥/MPa: 200Tensile strength σb/MPa: 500～700Elongation δ(longitudinal )≥(％): -Elongation δ(transversal )≥(％): 30Impact absorbing energy Akv≥/J|longitudinal: -Impact absorbing energy Akv≥/J|transversal: 60Intergranular corrosion resistance tendency | condition of delivery: YesIntergranular corrosion resistance tendency | condition of welding: Yes主耍適用范圍多數用途主要包括機械廠、醫藥化工、石油天然氣、手表、農業科技食品類和治療器材企業的貨品。這般文件可以用以大直徑不低于或小斷面的超去應力退火(去應力退火)動態。